Thermal Management Allows you to choose the thermal management of your monitor. Non-OS2 default , OS2. On default Numpad is number keys. It also coordinates communications with the PCI bus. When this area is reserved it cannot be cached. System will update BIOS automatically and restart. Supports Intel Hyper-Threading Technology.

Uploader: Yozshujind
Date Added: 6 April 2017
File Size: 48.89 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 79600
Price: Free* [*Free Regsitration Required]

If you have change the setting, you must let the system boot up until it goes to the operating system, before this function will work. Video Off In Suspend This determines the manner in which the monitor is blanked.

These configurations are factory settings optimized for this system. This will depend on which Hard Disk is installed. On Reboots the computer.

Half-duplex mode permits transmission in one direction only at a time. In this panel, you can get model name and detail information in hints of all the chipset that are related to overclocking. Fast default Lets chipset control Gate A System does not boot from hard disk 1. Software Installation Soudn install the software, please click on the Software icon.

Mainboard Driver: Biostar GV Micro Ver. 7.x

865tv Main Menu allows you to select from several setup functions. Overclock Panel Click the Overclock button in Main Panel, the button will be highlighted and the Overclock Panel will slide out to left as the following figure.


CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. Available bandwidth up to 3.

When this area is reserved it cannot be cached. After confirmed, please follow steps below to relief the CPU protection function.

System only boots from optical drive. Power Management Setup This submenu allows you to configure the power management features.

The user information of peripherals that need to use this area of system memory usually2 discussed their memory requirements. The information will be refreshed every 1 second. Half defaultFull. Insert the bootable disk into floppy drive and press Enter. Disabled default Virus protection is disabled. Bus ratio of the throttled performance state that will be initiated when the on-die 86g5v gose from not hot to hot.

Biostar GV Micro drivers

There is no guarantee that interference will not occur in a particular installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.


Reset your desired password or clear the CMOS data. This field applies only when synchronous DRAM is installed in the system. If the signal has been triggered, it will record to the CMOS and show the message on next boot-up. During Disabled, you cannot use this function.

Biostar 865GV Micro 478 Drivers

EXE under your optical drive. Exit Without Saving Abandon all changes made during the current session and exit setup. Pop up the following dialog. Load Optimized Defaults This selection allows you to reload the BIOS when the system is having problems particularly with the boot sequence. PC Health Status This submenu allows you to monitor the hardware of your system.

Reformat the hard drive.